Most of factories are closed in our city. Environment protection is important for our government.
Casting business is very hard now. They have a lot of orders now. And the price is high. But they can not produce. Environment is terrible. Steel is rising every day.
More and more friends are asking price of roll forming machines now. We are also surprised for the price of machine. I found that i made a lot of mistakes for many machines. I just gave clients for old price. But price is increased 30%.
Business is hard, Everyone think the price will be lower. And price goes a wrong direction.
It is rising in future. It is time for paying cost for environment.
2017年2月28日星期二
2017年2月19日星期日
836&1064 mmcorrugated roll forming machine- yufa company-Ted
Corrugated roll forming machine
Color steel corrugated roll forming machine
Galvanized steel corrugated roll forming machine
Thickness: 0.3-0.8mm corrugated roll forming machine
0.14-0.21 mm corrugated is another kind of barrel corrugated roll forming machine
We are YUFA
www.rollingformingmachine.com
Contact: Ted
Whatsapp: 008615031898708
Mail: ted@yufamachinery.com
2017年2月18日星期六
2017年2月17日星期五
Feeding width of steel coil is important in roll forming machine field
When you get a drawing from our roll forming machine client, we will make a new drawing by our engineer. We confirm the drawing timely. So we can design and produce machine
But a lot of clients do not have drawings of there goods. They just tell us what they need? Better for sending us one picture.
Frankly speaking, we can give you price by this picture. but we can not design and produce machine for you. You will wonder why
I need more details. For example, we also ask the feeding width of steel coil. And we confirm with you many times. Some clients are not happy. They think Ted 's company can not produce his machine. They are wrong. I tell you why
If you want to produce one gutter for roof. So we have many designs.
Feeding width can be 400/450/500/380mm or other numbers. These sheets can produce the gutter. But which one would you choose?
If you have width of coil is 1000 mm, you choose 400/450/500 and 380mm.
1000 mm width can be cutting as 400+400+200, then you have two pieces of 400mm. and 200mm can be using in other field or sold as wasting material.
And if you have width if 1200mm, which width will you choose. Every width is ok.
But i suggest 400mm. 400+400+400, no wasting material.
It is also same with other kinds of roll forming machines.
Any new questions, you can contact me
I am Ted
Whatsapp: 0088615031898708
Mail: ted@yufamachinery.com
More information, you can search in our webiste
www.rollingformingmachine.com
But a lot of clients do not have drawings of there goods. They just tell us what they need? Better for sending us one picture.
Frankly speaking, we can give you price by this picture. but we can not design and produce machine for you. You will wonder why
I need more details. For example, we also ask the feeding width of steel coil. And we confirm with you many times. Some clients are not happy. They think Ted 's company can not produce his machine. They are wrong. I tell you why
If you want to produce one gutter for roof. So we have many designs.
Feeding width can be 400/450/500/380mm or other numbers. These sheets can produce the gutter. But which one would you choose?
If you have width of coil is 1000 mm, you choose 400/450/500 and 380mm.
1000 mm width can be cutting as 400+400+200, then you have two pieces of 400mm. and 200mm can be using in other field or sold as wasting material.
And if you have width if 1200mm, which width will you choose. Every width is ok.
But i suggest 400mm. 400+400+400, no wasting material.
It is also same with other kinds of roll forming machines.
Any new questions, you can contact me
I am Ted
Whatsapp: 0088615031898708
Mail: ted@yufamachinery.com
More information, you can search in our webiste
www.rollingformingmachine.com
2017年2月13日星期一
Why, we are afraid of going to our factory and would like work in office.
Because i do not want to see my machines. They are pushing nothing. Delayed again. I am just waiting to hear that Ted, your machines are ok. call your clients to give us the payment.
Factory is busy for many machines. When receive a new order, it is urgent order. So push this order. When this order becomes to second order, so the first new order is urgent.
Boss pay money to us for bring more orders. We are also working for more orders. But when clients ask that Ted, how long of my machine will be finished. You always tell us 30 to 45 days. We believe you. Actually, at least 60 working days. And for Ted, my machine will be reached 90 days. Why? I know my orders are customized roll forming machine. And the machines need to be adjusted many times. It is real. No blame on this. But why throw the machine in other side and forget my machine. I do not push you, because i believe you. You are busy, you will pay attention to my machines. So my machines are always here. I have pressure from my clients. They are my friends but also my clients, How could i explain to them?
If you paid money to buy something from Internet, you signed contract with seller. Delivery time is 30 days. When half of 30 days, you must ask many times. The clients are same with you.
Trust is not easy for a new order. Why we waste every chance for our clients. They treat me as friends, they can understand us. But roll forming machine is also business. Clients need to get machines timely and sell the roof tiles.
I know if the factory is busy, it is a good thing for everyone. Boss can make money and we can have details of new machines. We can learn. I am just one roll forming machine trade manager.
We supply after-sale service. Frankly speaking, we do not receive a lot of supporting. It is not enough. If i could solve it, i will do it by myself. But if i could not do it, i need your help. The clients need your help.
If i am a seller of roof tiles, when i have a lot of orders and it is season of sales. But there is a problem of roll forming machine. I need help from factory. I am worried about it. We are all adult.
I know the reason of delaying, when we adjusting the machine, we think the roof tile is not good. In other factory, they receive this quality, but we will not accept it and adjust the design and change the wrong spare parts. It wastes money. We do this work for clients. Why be better?
Thanks
Hope everyone can make money from our roll forming machines.
Any questions of roll forming machines, you can contact me.
I am Ted
Whatsapp: 008615031898708
2017年2月6日星期一
Roll forming machine Sale manager becomes after-sale engineer
We have after-sale service for our clients. When our clients receive the roll forming machines, the service is starting. Clients contact me to buy the machines, so they will contact me when they have questions of their roll forming machines. Even our company enter boss's phone number in control box. But no one contact him for after-sale service. Actually, dear my friends, you should contact him.
Now i want to show the questions what i met during after-sale service time.
1. what space do we need for his roll forming machine
2. the distance of between the roll machine body and decoiler
3. How to install the steel coil with the manual decoiler
4. how to adjust the distance of the upper and down shaft
5. How to cut the steel coil when finish the working
6. How to set the numbers in control box
7. How to connect the wiring of roll forming machine
8. what kind of hydraulic oil should be filled in hydraulic motor box
9. How many oil should be filled in box
10. The machine not work automatically.
11. The cutter not goes up when cut the panel
12. the panel goes a wrong way in roll forming machine body, not form in one line
13. Client changed the parameter of encoder, i help them to change the parameter
14. the panel not stop when reach the length
15. Motor oil leakage
16. How to adjust the forming speed of roll forming machine
17. How to change the input width of steel coil
18. if the length under 3000mm, it can cut automatically, if more than 3000mm, for example 4000mm, it can not cut automatically. But if we set 4200mm, the roll forming machine can cut automatically.
19. Adjust the press height of glazed roll forming machine.
etc
There are many questions of roll forming machine. All questions are solved by me. I asked our workers and engineer. Now i am experienced in roll forming machine.
So my dear clients, can you pay money to our workers to your factory when you install the machine.
Most of clients like my character, I am a direct man. But i help my friends timely. I treat you as friends. Not all business in my life.
Hope i can have more friends in 2017 and can meet more questions of roll forming machine.
Ted is always on your side.
Whatsapp: 008615031898708
Mail: ted@yufamachinery.com
Now i want to show the questions what i met during after-sale service time.
1. what space do we need for his roll forming machine
2. the distance of between the roll machine body and decoiler
3. How to install the steel coil with the manual decoiler
4. how to adjust the distance of the upper and down shaft
5. How to cut the steel coil when finish the working
6. How to set the numbers in control box
7. How to connect the wiring of roll forming machine
8. what kind of hydraulic oil should be filled in hydraulic motor box
9. How many oil should be filled in box
10. The machine not work automatically.
11. The cutter not goes up when cut the panel
12. the panel goes a wrong way in roll forming machine body, not form in one line
13. Client changed the parameter of encoder, i help them to change the parameter
14. the panel not stop when reach the length
15. Motor oil leakage
16. How to adjust the forming speed of roll forming machine
17. How to change the input width of steel coil
18. if the length under 3000mm, it can cut automatically, if more than 3000mm, for example 4000mm, it can not cut automatically. But if we set 4200mm, the roll forming machine can cut automatically.
19. Adjust the press height of glazed roll forming machine.
etc
There are many questions of roll forming machine. All questions are solved by me. I asked our workers and engineer. Now i am experienced in roll forming machine.
So my dear clients, can you pay money to our workers to your factory when you install the machine.
Most of clients like my character, I am a direct man. But i help my friends timely. I treat you as friends. Not all business in my life.
Hope i can have more friends in 2017 and can meet more questions of roll forming machine.
Ted is always on your side.
Whatsapp: 008615031898708
Mail: ted@yufamachinery.com
2017年2月5日星期日
Maintaining the roll forming machine when you are during holiday
We are back from China spring festival now. We did not go to office for two weeks. Now we are working.
How about you. Spring festival is also celebrated in other countries. So they also have holidays. And for my clients, do you maintain your roll forming machine before spring festival.
I think most of clients did not do that work. But it is helpful for your roll forming machines.
When we do not use our roll forming machines for a long time, we should clean all rollers and paint the oil on surface of the rollers.
Paint oil on the chain.
Also do this work for cutter. Switch of the power. Check all wiring of roll forming machine. Better to cover the whole body of roll forming machine by film.
Frankly speaking, clean working should be done everyday. So our machine can have a long using life.
My clients, follow my suggestion, you can use your machine for a long time.
Contact: Ted
YUFA roll forming machine company
How about you. Spring festival is also celebrated in other countries. So they also have holidays. And for my clients, do you maintain your roll forming machine before spring festival.
I think most of clients did not do that work. But it is helpful for your roll forming machines.
When we do not use our roll forming machines for a long time, we should clean all rollers and paint the oil on surface of the rollers.
Paint oil on the chain.
Also do this work for cutter. Switch of the power. Check all wiring of roll forming machine. Better to cover the whole body of roll forming machine by film.
Frankly speaking, clean working should be done everyday. So our machine can have a long using life.
My clients, follow my suggestion, you can use your machine for a long time.
Contact: Ted
YUFA roll forming machine company
Clients know spare parts of roll forming machine are important
When we talk about the machines, we should confirm the guarantee services. One year guarantee, if the spare parts are broken, when will send you them but you should pay the express cost. Yes, it is right. And if you have a big order, do you have time to wait one week time?
So why not buy few of them with the machine. They are cheap but can help you timely.
we also give you few by free.But it is not enough.
Ted suggest that buy some if you can stand the cost
Contact: Ted
Whatsapp: 008615031898708
Distance of the two stations for roll forming machine
Do you know what is the distance between two stations. Is it important?
Yes, it is important. If the distance is bigger, than panel will be not good. So we should design the distance in accordance with the drawing.
When we are adjusting the roll forming machine, if there is a problem of the distance of the stations. We must change the distance of the roll forming machine stations. Then we must change a new frame. Cost will be added.
YUFA company will change the frame of roll forming machine if we found the distance was wrong.
That is our attitude in roll forming machine.
That is why we are stronger and stronger.
Yes, it is important. If the distance is bigger, than panel will be not good. So we should design the distance in accordance with the drawing.
When we are adjusting the roll forming machine, if there is a problem of the distance of the stations. We must change the distance of the roll forming machine stations. Then we must change a new frame. Cost will be added.
YUFA company will change the frame of roll forming machine if we found the distance was wrong.
That is our attitude in roll forming machine.
That is why we are stronger and stronger.
How to cut the steel coil when we finish the order in feeding side, do you know which way?
And do you know how to cut the feeding side?
1. Few years ago, we used the hand scissor to cut.
2. We are using the electric scissor in our factory( check the video)
3. Hand cutter
4. Automatic pre cutter system
Do you have other ways?
Our company website:
http://www.rollingformingmachine.com/
Contact: Ted
Whatsapp/wechat:008615031898708
Mail: ted@yufamachinery.com
2017年2月4日星期六
Appreciate honest attitude in roll forming machine for clients.
When we get a order of roll forming machine, we do not know the total cost of this machine. The including the design / material producing / spare parts / tax / labors / electric cost / Equipment cost / transport cost and adjust cost.
All of the above control the cost of roll forming machine. And adjust cost is important for client. If we did not adjust the machine or we found the problem, but we did not solve it for client. We will save a lot of money and you can not find the problem when you checking the machine.
Do you trust that you can order a wonderful machine?. God can bless you.
I have two machines for producing now. It is more than 60 working days. Machine is not ok. We adjust them for a long time now. We changed the frame of the machine, we adjust the distance of the shafts, we changed the rollers. Cost is high now. We are still adjusting now. I appreciate this attitude. Our workers are good.
Our boss is good. We just supply good machine to our clients.
We started working yeaterday. http://www.rollingformingmachine.com/news/the-new-beginning-of-yufa-roll-forming-machine
Welcome all friends to our factory for visiting
Ted with all our colleagues are waiting for you
Whatsapp: 008615031898708
All of the above control the cost of roll forming machine. And adjust cost is important for client. If we did not adjust the machine or we found the problem, but we did not solve it for client. We will save a lot of money and you can not find the problem when you checking the machine.
Do you trust that you can order a wonderful machine?. God can bless you.
I have two machines for producing now. It is more than 60 working days. Machine is not ok. We adjust them for a long time now. We changed the frame of the machine, we adjust the distance of the shafts, we changed the rollers. Cost is high now. We are still adjusting now. I appreciate this attitude. Our workers are good.
Our boss is good. We just supply good machine to our clients.
We started working yeaterday. http://www.rollingformingmachine.com/news/the-new-beginning-of-yufa-roll-forming-machine
Welcome all friends to our factory for visiting
Ted with all our colleagues are waiting for you
Whatsapp: 008615031898708
One easy way to check the quality of step tile glazed roll forming machine
Above pictures are 1100 glazed tile. We call this machine as 1100 glazed tile roll forming machine and also call it as step tile roll forming machine.
It looks like the stairs, one step to another step. So step tile machine is also right.
Many manufacturers can produce the glazed/step tile roll forming machine now. But most of them can produce few kinds of glazed roll forming machine. Because they have no design engineer. They just buy drawings from others. So they can produce few old design drawings and can not design new drawing.
So the quality is different. Most of buyers are new in this field. They do not know how to compare the quality. Just buy the one that they like. Maybe looks beautiful or cheap cost. Now, i tell you how to check the quality of step tile roll forming machine.
Only one point is enough for you. Very easy.
You can use it when checking the glazed tile roll forming machine in factory.
Suggest the manufacturer produce two pieces with long length. 5 or 6 meters are enough. Then, install them together, cover together. Check the edge of the two pieces.
Whether they are covering with no joint or small joint. Maybe you can find an interesting thing, the joint should be very big.
Problem is coming now. Do you receive this quality? You are not happy to receive it. But whether the manufacturer ca fix it?
Hope everyone can know this way to check the quality of glazed tile roll forming machine.
Price is important but quality is first. second is the price.
Our company is professional with acceptable price. Welcome you to our factory for visiting.
Contact: Ted
Whatsapp: 008615031898708
Floor deck roll forming machine or deck floor roll forming machine manufacturer
http://www.rollingformingmachine.com/steel-floor-decking-roll-forming-machine.html
Yufa pengxiang floor bearing ( floor deck) company does well in floor deck roll forming machines. We have many machines in stock.
Machines are working everyday for producing the floor decks.
Floor deck is using in steel construction building. Fill the concrete on it and save the construction time and cost.
Floor deck is strong for building
There are many kinds of floor decks.If you have interests, welcome you to our factory for visiting
Contact: Ted
Whatsapp: 008615031898708
Mail: ted@yufamachinery.com
Skype: yufa_2
Wechat: 008615031898708
2017年2月3日星期五
Our company start working now
Hello everyone
We start working today. If you have inquiries or questions of roll forming machine, feel free to contact me
I am Ted
Whatsapp: 008615031898708
Mail: ted@yufamachinery.com
Skype: yufa_2
Beijing YUFA Pengxiang company
And we have a new website now
http://www.rollingformingmachine.com/
Welcome all of my friends to search what you want by it
Thanks
We start working today. If you have inquiries or questions of roll forming machine, feel free to contact me
I am Ted
Whatsapp: 008615031898708
Mail: ted@yufamachinery.com
Skype: yufa_2
Beijing YUFA Pengxiang company
And we have a new website now
http://www.rollingformingmachine.com/
Welcome all of my friends to search what you want by it
Thanks
订阅：
博文 (Atom)